DYTP系列电液推杆

DYTP系列电液推杆

产品编号:
DYTP-2550/200/50 S
产品型号:
产品描述:

DYTP系列电液推杆是一种集机、电、液为一体的液压驱动装置,可广泛用于冶金、建材、化工、起重运输及港口装卸机械中的阀门、闸门、换向、倾转、摆动等机械的驱动和控制,可取代传统的电动推杆、液压缸(由液压站驱动)和气缸(由气泵站驱动控制)。
DYT系列电液推杆DYT SERIES ELECTRO-HYDRAULIC PUSHER

应用APPLICATION


●DYT系列电液推杆是一种集机、电、液为一体的液压驱动装置,可广泛用于冶金、建材、化工、起重运输及港口装卸机械中的阀门、闸门、换向、倾转、摆动等机械的驱动和控制,可取代传统的电动推杆、液压缸(由液压站驱动)和气缸(由气泵站驱动控制)。
APPLICATION
●DYT series electro-hydraulic pusher is hydraulic drive device which integrates electricity, mechanism and hydraulics. It is widely used as drive and control device for various valves, pen stock, pendulum and steering mechanism in metallurgical, building,chemical, port handling machinery and cranes. It is a deal solution for replacing the traditional motor- driven pusher, oil cylinder with hydraulic station and air cylinder with air unit.

主要特点MAIN FEATURE


●结构紧凑、安装方便、占据空间小、维护简单。
●回路设有双向液压锁,可停在规定行程范围内的任意位置停止并自锁,且保持输出力不变。
●推拉力、速度(用户要求)无级可调,驱动力范围极广。
●因故断电,推杆自锁,避免发生事故。
●采用全液压传动、动作灵敏、运行平稳,能有效缓冲外来冲击力,行程控制精确。
●机电液一-体化全封闭结构,工作油路循环于无压的封闭钢筒里,体积小,不渗油,在恶劣的工作环境下,
不吸尘,不进水,内部不锈蚀,使用寿命长。
●电器控制简单,通过增设各种限位开关,实现远程和危险区域的操作控制及计算机(PLC)自动控制。
MAIN FEATURE
●Compacl structure, easy installation, small occupying space and simple maintenance.
●A two-way hydraulic lockis arranged in the loop, which can be stopped at any position within the prescribed travelrange and self locked, and the output force remains unchanged.
●Push force and speed (user requirements) are step-less and adjustable, and the driving force range is very wide.
●Therefore, the power is cut off and the push rod is self locked to avoid accidents.
●It adopts full hydraulic transmission, sensitive action and smooth operation, which can effectively buffer extemal impact force and precise stroke control。
●Mechanical and hydraulic integrated closed structure, working oil circulation jo the pressure free closed steel cylinder, small volume,no oil seepage, in bad working environment, no dust。 No water, no corrosion inside, long service life。
●Electrical control is simple. By adding various limit switches, itis easy to realize remote control and dangerous area operation control,and computer (PLC) automatic control.

工作原理WORKING PRINCIPLE


●电液推杆是一种机、电、液一体化的新型柔性传动机构,它以执行机构(油缸)、控制机构(液压控制阀组)和动力源(油泵电机等)组成,根据现场安装空间及用户使用情况电液推杆可有多种结构形式(具体见电液推杆外形安装尺寸图,也可根据用户要求定制样式)。电动机通过正反转驱动双向液压泵正反输出压力油,经液压控制阀送至油缸,实现活塞杆的往复运动。
WORKING PRINCIPL E
●The electro-hydraulic pusher is a new type of flexible transmission mechanism, which is composed of the actuator (oil cylinder); the control mechanism (hydraulic control valve group) and the power source (oil pump motor etc)。 The Electro-hydraulic pusher can have various structural forms according to the site installation space and the user's use。 You can also customize the style according to the requirements of
the user。 The motor drives the bidirectional hydraulic pump forward and reverse to output the pressure oil through positive and negative reversals, and sends it to the oil cylinder through the hydraulic control valve to realize reciprocating motion of the pistonrod。

结构性能STRUCTURE PERFORMANCE


●液压控制阀组主要由溢流阀,吸油单向阀,单向阀,调速阀(根据用户要求),液控单向阀(液压锁)等组成,也可根据电液推杆的工作特性,设计不同功能的油路组合阀,满足其工作要求。一般有推出自锁,拉回自锁和推拉均自锁;运行速度有可调速型,不可调速型;电液推杆工作角度有水平推,向上推(包括斜向上),向下推(包括斜向下)等几种形式。
STRUCTURE PERFORMANCE 。
●The hydraulic control valve group is mainly composed of overflow valve, oll sucking one -way valve, one -way valve, speed regulating valve (user request), liquid controlled one- way valve (hydraulic lock) and so on, and it can also be pushed by electric liquid。 The working characteristics of the rod are designed, and different functions of the oil way combinationvalve are designed to meet its working requirements。 Generally, self lock is introduced, self locking and push-pull self。 -locking are achieved。 The speed governing type is not adjustable, and the working angle of the Electro-hydraulic Pusher has horizontal pushing, pushing upward (including oblique upward), pushing downward (including oblique downward) and so on。

使用条件OPERATING CONDITION


●环境温度: -20℃ ~ +50℃
●相对湿度:≤90%
●电源电压: 3相、交流380V。 50Hz
(其它电源电压下的电流参数请与我们技术人员联系)
●适应的工作制: S3, 40%接电持续率
●有特殊要求时,在订货时协商确定。
OPERATING CONDITION
●Ambient temperature: -20℃- + 50℃
●Relative humidity:≤90%
●Voltages: AC 3 phase 380V 50Hz ( Other voltage can be made as required )
●Operating duty: intermittent (S3, 40%)
●Special requirements can be discussed before production.

订货标记 ORDER MARK


订货示例ORDER EXAMPLE


●DYTZWB 1000-400/50PK1。F DYTPX3000- 1000/90X K2。F。 A。S1 50Hz。660V
●注:整体外置式电液推杆(DYTZW型)制造额定推力在100-3000kg范围内、行程在5-600mm范围内(由于油箱
容积小,所以制造行程有限制),若超出此范围可选用整体直式型(DYTZ型),技术参数基本相同。
(符合制作要求的DYTZW型也可标为DYTZ型)
●Note: the overall external Electro-hydraulic Pusher (DYTZW type) makes the rated thrust within the range of 100- 3000kg and is within the range of 5-600mm (because the volume of the tank is smal, so the travel limit is made)。 If the overall straight type (DYTZ type) can be chosen beyond this range, the technical parameters are basically the same。
(the DYTZW type that meets the production requirements can also be labeled as DYTZ).

附加装置(选择) OPTIONS AND ACCESSORIES (SELECTION)


●外置限位开关:可提供无触点感应式(接近开关)和有触点接触式(机械式开关)供客户选择。
●安装底座:默认本厂制作标准,也可根据要求订制。
●手动装置:手动泵或手轮,实现手动驱动。
●防尘罩:保护活塞杆的柔性可伸缩保护罩。
●根据用户需要,可生产各种防爆及非标产品。
OPTIONS AND ACCESSORIES ( SELECTION)
●External limit switch: it can provide non-contact inductive (proximity switch) and contact contact type
(mechanical switch) for customers to choose。
●Installation base: default factory production standard, can also be customized according to requirements.
●Manual device: manual pump or hand wheelto realize manual driving.
●Dust cover: flexible and telescopic protective cover for piston rod protection
●We can produce various,explosion-proof and non-standard brake as you required。

DYT系列电液推杆技术参数及安装尺寸TECHNICAL DATA AND DIMENSIONS OF DYT SERIES ELECTRO-HYDRAULC PUSHER


●一、S为推杆额定行程。
●二、上列表中所列电机的电压为AC 380V,防护等级IP55,绝缘等级为B。
●三、超出列表的行程制造范围或速度制造范围的,另行注明,否则按表内技术参数制造。
●四、列表中的速度范围为水平使用时的范围,向上或向下使用的速度均为水平的1/2。
●五、列表中的电机功率,是推杆在额定输出力和额定推速较大时的电机功率,电机功率与推拉力成正比。
●六、本公司可定制各类特种电液推杆,额定推力较大可达80T,额定行程可达8米。
●七、具体型号,结构外形尺寸保留更改的权利。
1.S is the rated stroke of the push rod.
2. The voltage of the motors listed in the upper list is AC380V, the protection level is IP55, and the insulation levelis B.
3. The scope of manufacture or speed of manufacture beyond the list should be specified otherwise, otherwise it will be manufactured
according to the technical parameters in the table.
4. The speed range in the list is horizontally used, and the speed up or down is horizontal 1/2.
5. The motor power in the list is the motor power of the putter at the rated output force and the maximum rated speed, and the motor
power is directly proportional to the pushing force。
6. The company can customize all kinds of special Electro-hydraulic Pusher, the rated thrust can reach 80T, and the rated travel can
reach 8 meters.
7. The size of the specific type and structure should be retained.
河北快3开奖 北京28预测 荣鼎彩开奖 荣鼎国际 荣鼎彩开户 秒速牛牛官网 北京赛车pk10投注 福建快三注册 大唐APP 秒速牛牛计划平台